 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CLE100F Gallium Arsenide IRED Flat Lead PLCC Package (R) Clairex August, 2001 Technologies, Inc. ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) absolute maximum ratings (TA = 25C unless otherwise stated) storage temperature ...................................................................... -40C to +125C operating temperature ................................................................... -40C to +125C lead soldering temperature(1) ......................................................................... 240C (2) maximum continuous current ....................................................................... 30mA peak forward current (10s pulse width, 100pps) ................................................ 1A description maximum power dissipation(3)........................................................................ 75mW The CLE100F is a 940nm infrared emitting diode featuring current GaAs reverse voltage .................................................................................................... 5V technology with a AlGaAs window for notes: increased quantum efficiency. The 1. 0.06" (1.5mm) from case for 5 seconds maximum. Maximum temperature chip is mounted in a compact, can be 260C if reflow soldering. embedded leadframe package with 2. Derate linearly 0.24mA/C from 25C free air temperature to TA = +125C. flying lead configuration and 3. Derate linearly 0.60mW/C from 25C free air temperature to TA = +125C. overcoated with clear epoxy to provide a wide emission pattern. Different wavelength chips, different lenses and different lead configurations are available. For additional information, call Clairex. features * Flat lead PLCC package * 60 emission angle * 940 nm peak wavelength electrical characteristics (TA = 25C unless otherwise noted) symbol PO VF IR p BW HP parameter Total power output(4) Forward voltage Reverse current Peak emission wavelength Spectral bandwidth at half power points Emission angle at half power points min 2.0 typ 940 50 120 max 1.5 10 units mW V A nm nm deg. test conditions IF = 20mA IF = 20mA VR = 5.0V IF = 20mA IF = 20mA IF = 20mA note: 4. Power output is measured in an integrating sphere. Clairex reserves the right to make changes at any time to improve design and to provide the best possible Revised 12/01/04 Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Plano, Texas 75074-8524 www.clairex.com |
Price & Availability of CLE100F
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |